EN
10G SFP+ 850nm 300m MMF Multi Mode Dual Fiber LC Optical Module
multi-mode SFP modules
Brand:
PINWEI
Spu:
SFP-10G-850-300
- Overview
- Recommended Products
Product Description
The SFP-10G-850-300 is a high performance, cost effective modules,which is supporting up to 10.3125Gbps, and transmission distance up to 300m on MM fiber. The transceiver consists of two sections:The transmitter section incorporates alaser driver and a 850nm VCSEL laser. The receiver section consists of a PIN photodiode integrated with a transimpedance preamplifer (TIA) and a Limitting Amplifier. The module is hot pluggable into the 20-pin connector. The high-speed electrical interface is base on low voltage logic, with nominal 1000hms differential impedance and AC coupled in themodule.
The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Transmit Fault(Tx_Fault)is provided to indicate that the module transmitter has detected a fault condition related to laser operation or safety. Loss of signal (RX_LOS)output is provided to indicate the loss of an input optical signal of receiver. A serial EEPROM in the transceiver allows the user to access transceiver monitoring and configuration data via the 2-wire SFP Management Interface. This interface uses a single address, A0h, with a memory map divided into a lower and upper area. Basic digital diagnostic (DD)data is held in the lower area while specific data is held in a series of tables in the high memory area.
Features
Up to 300m transmission on MMF
Upto10.3125Gbps
850nm VCSEL laser and PIN receiver
SFI electrical interface
2-wire interface for integrated Digital Diagnostic monitoring
Up to 300m transmission on MMF
Upto10.3125Gbps
850nm VCSEL laser and PIN receiver
SFI electrical interface
2-wire interface for integrated Digital Diagnostic monitoring
SFP+ MSA package with duplex LC connector
Hot pluggable
Very low EMl and excellent ESD protection
+3.3V power supply
Power consumption less than 1.0W
Operating case temperature: 0~+70°C
Hot pluggable
Very low EMl and excellent ESD protection
+3.3V power supply
Power consumption less than 1.0W
Operating case temperature: 0~+70°C
Compliance
Compliant with lEEE 802.3ae-2002
Compliant with lEEE 802.3ae-2002
Compliant with MSA SFF-8472
Compliant with MSA SFF-8431
Compliant with MSA SFF-8431
Specification
item |
value |
Model Number |
10G-850-300 |
Use |
FTTX |
Warranty Time |
1 YEAR |
Material |
Mental |
Wavelength |
850nm |
Fiber Type |
Multi Mode Double Fiber LC |
Distance |
300 m |
Weight |
0.02 kg |
Dimensions |
1*1.5*6 cm |
Warranty Time |
1 Year |
Application |
FTTH FTTxFTTB Network |
Data Rate |
10Gbps |
