EN
10/100M Non-standard 12V 24V 16 Ports PoE Switch with 2 Gigabit RJ45 Uplink Port
150W Non-standard Power Over Ethernet 16-Port Switch Desktop
Brand:
PINWEI
Spu:
PW-16EP2GE-24V-D
- Overview
- Recommended Products
Products Description
Non-standard PoE switches refer to power supply methods that do not comply with the IEEE 802.3af/at/bt protocol. They provide power through the specific line pairs 45+78- of the network cable, with a voltage of 12V, 24V or 48V. They power specific non-standard PoE cameras and IPC and transmit data.
Suitable for low-cost, small-scale specific scenarios, but it is necessary to ensure that the powered device is fully compatible with the non-standard power supply parameters. When purchasing, it is recommended to prioritize the power supply requirements of the device (voltage, line sequence, power) to avoid damage due to power supply mismatch. If you have high requirements for stability and high power, you can consider upgrading to a standard PoE switch.
Suitable for low-cost, small-scale specific scenarios, but it is necessary to ensure that the powered device is fully compatible with the non-standard power supply parameters. When purchasing, it is recommended to prioritize the power supply requirements of the device (voltage, line sequence, power) to avoid damage due to power supply mismatch. If you have high requirements for stability and high power, you can consider upgrading to a standard PoE switch.
• Ports & rate: Includes 16*10/100Mbps ports and 2*10/100/1000Mbps ports,
• Power: 150W, built-in power supply makes installation easier.
• Plug & Play: No setup required, connect the Ethernet cable directly to the device.
• Extend function: Support Extend max 250 meters which is easy to expand network via Ethernet cable to somewhere without power supply.
• Widely Used: Provide power for wireless AP, IP Camera which is nonstandard PD devices.
• Power: 150W, built-in power supply makes installation easier.
• Plug & Play: No setup required, connect the Ethernet cable directly to the device.
• Extend function: Support Extend max 250 meters which is easy to expand network via Ethernet cable to somewhere without power supply.
• Widely Used: Provide power for wireless AP, IP Camera which is nonstandard PD devices.
Specification
Attribute |
value |
Transmission distance |
250 meters |
Product status |
Stock |
Network protocol |
IEEE802.3 10BASE-T, IEEE802.3u 100Base-TX |
Communication mode |
Full-Duplex & Half-Duplex |
Brand |
PINWEI |
Place of Origin |
GUA |
Private mold |
Yes |
Power supply core |
45+78- |
Support |
12V/24V output |
Total power |
150W |
Dimensions (W x D x H) |
260*170*45mm |
Weight |
2.5KG |
Operating temperature |
0-50℃(32-131℉) |
Installation method |
Desktop |
