4K@60Hz YUV 4:4:4 HDBase-T HDMI KVM Extender Over Cat6/7 up to 150m with USB2.0/ POC / Bi-directional IR

4K HDMI KVM Extender

Brand:

PINWEI

Spu:

PW-1HDB1K-4K

Overview
Recommended Products

Product Description

This 18Gbps HDBase-T Extender can extend HDMI signal, bi-directional IR control signal and USB KVM signal to a distance up to 492ft / 150m (Long Reach Mode) via a single CAT6 cable. This product converts HDMI signal to standard HDBase-T signal and transmits it through LAN cable. It can easily control signal source device or display device from the remote end through bi-directional IR signal pass-through function. Video resolution is up to 4K2K@60Hz YUV 4:4:4. It also supports POC function. The extender can be widely used in other fields such as video conference system, multimedia signal broadcasting, HDMI signal extension, etc.

Product Feature

HDMI 2.0b and HDCP 2.2 compliant;

Support 18Gbps video bandwidth;

Support video resolution up to 4K2K@60Hz YUV 4:4:4;

With Mode DIP switch to select HDBase-T Mode & Long Reach Mode HDBase-T;

Mode: -USB supports USB 2.0 transmission (support connecting with USB camera, USB flash drive and other devices); the audio & video signal transmission distance can be extended up to 328ft / 100m for 4K60 Long Reach;

Mode: -USB only supports HID (Human Interface Device) device; the audio & video signal transmission distance can be extended up to 492ft /150m for 1080P or 394ft / 120m for 4K60;

Bi-directional IR signal and USB KVM signal pass-through are supported;

Support bi-directional POC (Power over Cable) function;

Advanced EDID management;

Compact design for easy and flexible installation.

Specification

Technical
HDMI Compliance			HDMI 2.0b
HDCP Compliance			HDCP 2.2
Video Bandwidth			18Gbps
Video Resolution			Up to 4K2K@60Hz YUZ 4:4:4
USB Compliance			USB 2.0
IR Level			5Vp-p
IR Frequency			Wide-band 20K-60KHz
Transmission distance			HDBase-T Mode: 4K60 -- 328ft/100m Long Reach Mode: 1080P -- 492ft/150m ; 4K60 -- 394ft/120m
Color Space			RGB 4:4:4, YCbCr 4:4:4/4:2:2, YUV 4:2:0
Color Depth			8/10/12-bit
HDR			HDR, HDR10, HDR10+, Dolby Vision, HLG
Audio Format			LPCM 7.1CH, Dolby True HD and DTS-HD Master
ESD Protection			Human body model—— ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connection
Transmitter			Input: 1xHDMI IN [Type A, 19-pin female] 1xIR IN [3.5mm Stereo Mini-jack] 1xSERVICE [Micro-USB jack] 1xUSB [USB-B, 4-pin female] Output: 1xHDBT OUT [RJ45] 1xIR OUT [3.5mm Stereo Mini-jack]
Receiver			Input: 1xHDBT IN [RJ45] 1xIR IN [3.5mm Stereo Mini-jack] 1xSERVICE [Micro-USB jack] Output: 1xHDMI OUT [Type A, 19-pin female] 1xIR OUT [3.5mm Stereo Mini-jack] 2xUSB 2.0 [USB-A, 4-pin female]
Mechanical
Housing			Metal Enclosure
Silkscreen Color			Black
Dimensions			140mm (W) × 65mm (D) × 18mm (H)
Weight			TX: 245g; RX:250g
Power Supply			DC 24V/1A Support bi-directional POC function
Power Consumption			13.2W (Max)
Storage Temperature			-20°C ~ 60°C / -4°F ~ 140°F
Operation Temperature			0°C ~ 40°C / 32°F ~ 104°F
Relative Humidity			20~90% RH (non-condensing)

Operation Controls & Functions

TX panel:

No.	Name	Function Description
1	PWR LED	The red LED is on when the TX is powered on
2	EDID DIP switch	Used for audio EDID setting (dial to COPY by default) COPY: Copy the EDID of the HDMI OUT port of RX STD: Default 1080P 2CH
3	SERVICE	Firmware update port
4	DC24V	DC24V/1A power input port Note that the extender supports POC function, it means that either Transmitter or Receiver is connected to 24V/1A power supply, the other doesn't need power supply
5	HDBT OUT	HDBT output port, connecting to the HDBT IN port of the RX with CAT6 cable
6	Link Signal Indicator (Green)	▪ Illuminating: TX and RX are in good connection status ▪ Flashing: TX and RX are in poor connection status ▪ Dark: TX and RX are not connected
7	Data Signal Indicator (Yellow)	▪ Illuminating: HDMI signal with HDCP ▪ Flashing: HDMI signal without HDCP ▪ Dark: No HDMI signal
8	HDMI IN	HDMI signal input port, connecting to HDMI source device such as DVD play or Set Top Box
9	IR IN	Connect to IR receiver cable, the IR receive signal will emit to the IR OUT port of the RX
10	IR OUT	Connect to IR blaster cable, the IR emit signal is from the IR IN port of the RX
11	PC	USB-B port, connecting to PC

RX panel:

No.	Name	Function Description
1	PWR LED	The red LED is on when the TX is powered on
2	MODE DIP switch	Used for audio Mode switching (dial to HDBT by default) HDBT: Switching to the HDBase-T Mode Long Reach: Switching to the Long Reach Mode
3	SERVICE	Firmware update port
4	DC24V	DC24V/1A power input port Note that the extender supports POC function, it means that either Transmitter or Receiver is connected to 24V/1A power supply, the other doesn't need power supply
5	HDBT IN	HDBT input port, connecting to the HDBT OUT port of the TX with CAT6 cable
6	Link Signal Indicator (Green)	▪ Illuminating: TX and RX are in good connection status ▪ Flashing: TX and RX are in poor connection status ▪ Dark: TX and RX are not connected
7	Data Signal Indicator (Yellow)	▪ Illuminating: HDMI signal with HDCP ▪ Flashing: HDMI signal without HDCP ▪ Dark: No HDMI signal
8	HDMI OUT	HDMI signal output port, connecting to HDMI display device such as TV or monitor
9	IR IN	Connect to the IR receiver cable. The IR signal will send to the IR OUT port of the TX
10	IR OUT	Connect to IR blaster cable, the IR signal is from the IR IN port of the TX
11	USB 2.0 ports	Two USB-A ports, connecting to USB 2.0 devices. (The maximum output current of a single USB 2.0 port is 500mA, exceeding which it will not work)