EN
4K@60Hz 4:4:4 18Gbps USB-C/HDMI USB2.0 Extender over CAT6/7 up to 70m with IR RS232 Control and POC
HDbase-T
Brand:
PINWEI
Spu:
PW-HDU2-E70-4K
- Overview
- Recommended Products
Product Description
This 18Gbps HDBaseT 3.0 Extender can extend uncompressed HDMI/USB-C signals, bi-directional IR, RS-232, and USB 2.0 signals up to 230ft/70m (4K30/1080P) or 131ft /40m (4K60) via a single CAT6A/7 cable. Video resolution is up to 4K2K@60Hz YUV 4:4:4. The transmitter features with 1x HDMI input, 1x USB-C input (60W charging), 1x USB Host and 3x USB Device ports. The receiver features with 1x HDMI output, 2x USB Device ports. Both transmitter and receiver support 3.5mm analog audio de-embedding, EDID management, bi-directional IR and RS-232 signal pass-through. This product supports bi-directional 24V POC function.The Extender offers the most convenient solution for video extension via a single CAT cable with long distance capability, and it is the perfect solution for home/commercial application
2. Features
☆ Compliant with HDMI 2.0b and HDCP 2.3, 18Gbps video bandwidth
☆ HDBaseT 3.0 VS300R chipset based design
☆ Support video resolution up to 4K2K@60Hz (YUV 4:4:4)
☆ Uncompressed video signal transmission distance can be extended up to 230ft/70m for 4K@30Hz, or 131ft/40m for 4K@60Hz over a single CAT6A/7 cable
☆ TX features with 1x HDMI input, 1x USB-C input, 1x HDBT output, 1x USB 2.0 host and 3x USB 2.0 clients
☆ RX features with 1x HDMI output, 2x USB 2.0 clients
☆ USB-C and HDMI signal inputs support auto or manual switching mode
☆ Auto switching supports HDMI 5V or signal detect selection
☆ USB-C supports DP-ALT mode for A/V, USB 2.0 data and power charging up to 60 watts
☆ TX/RX USB-A client ports VBUS on or off depends on USB host is connected or not
☆ HDR, HDR10, HDR10+, Dolby Vision LLM and HLG pass-through
☆ 4K to 1080p downscaling features on HDMI output, no frame rate conversion
☆ Both TX and RX support analog audio de-embedding
☆ RS-232 signal pass-through and guest-mode control
☆ Support bi-directional IR signal pass-through, USB 2.0 signal transmission
☆ Advanced EDID management
☆ Each USB-A port provides power up to 5V/500mA
☆ Support bi-directional 24V POC, with POC switch
☆ Compact design for easy and flexible installation
Specification
HDMI Compliance |
HDMI 2.0b |
HDCP Compliance |
HDCP 2.3 |
Video Bandwidth |
18Gbps |
Video Resolution |
Up to 4K@60Hz 4:4:4 |
Color Depth |
8/10/12bit |
Color Space |
RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0 |
IR Level |
12Vp-p |
IR Frequency |
Wideband 20K-60KHz |
HDR |
HDR, HDR10, HDR10+, Dolby Vision, HLG |
Analog Audio Formats |
HDMI/USB-C/HDBT: LPCM 2/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD 3.5mm Analog Audio: LPCM 2CH |
ESD Protection |
Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact discharge) |
Input |
1×HDMI Type A (19-pin female)
1 x USB-C IN [USB Type C, 24-pin female]
|
Output |
1 x HDBaseT OUT [RJ45, 8-pin female]
1 x L/R OUT [3.5mm Stereo Mini-jack]
|
Control |
1 x IR IN [3.5mm Stereo Mini-jack]
1 x IR OUT [3.5mm Stereo Mini-jack]
1 x RS-232 [3pin-3.81mm phoenix connector]
1 x SERVICE[Micro USB, 5-pin female]
1 x USB HOST [USB Type B, 4-pin female]
3 x USB Devices [USB Type A, 4-pin female]
|
Dimensions |
Transmitter: 170mm [W] x 102mm [D] x 22mm [H]
Receiver: 144mm [W] x 78mm [D] x 23mm [H]
|
Power Consumption |
94.32W (Power supply from TX, 60W USB-C charging, POC to RX) 10.8W (Power supply from TX or RX, without USB-C charging) |
Operation Temperature |
32 - 104°F / 0 - 40°C |
Packing
