EN
1 input 4 output USB3.0 Extender via Ethernet Cable up to 100m Compatible with USB 2.0/ 1.1
USB Repeater Data Transfer
Brand:
PINWEI
Spu:
PW-USB3-E100
- Overview
- Recommended Products
Product Description
The USB 3.0 Extender can extend USB signal to a distance up to 100m via a single CAT6a cable. Transmitter with USB 3.0 Type B input, FSYSNC GPIO input and RS-232 pass-through. Receiver with four USB 3.0 Type A outputs, FSYSNC GPIO output and RS-232 pass-through. Bi-directional 24V PoC is also supported. The product can be widely used for long distance signal transmission
between a PC and USB devices.
between a PC and USB devices.
Specification
USB Protocol |
USB 3.0 |
Transmission Rate |
Up to 5Gbps |
Network Bandwidth |
10G |
Transmission Distance |
100m over CAT6a (F/FTP) cable |
ESD Protection |
IEC 61000-4-2: ±8kV (Air-gap discharge), ±4kV (Contact discharge) |
Transmitter |
Input: 1 × USB HOST [USB-B, 9pin Female] Output: 1 × HDBT OUT [RJ45, Female] Control: 1 × RS-232 [3pin-3.5mm Phoenix Connector] 1 × FSYNC [1pin-3.5mm Phoenix Connector] 1 × SERVICE [USB-C, Update Port] |
Receiver |
Input: 1 × HDBT IN [RJ45, Female] Output: 4 × USB Devices [USB-A, 9pin Female] Control: 1 × RS-232 [3pin-3.5mm Phoenix Connector] 1 × FSYNC [1pin-3.5mm Phoenix Connector] 1 × SERVICE [USB-C, Update Port] |
Dimensions |
Transmitter / Receiver: 85mm [W] × 100mm [D] × 25.5mm [H] |
Weight |
Transmitter: 260g, Receiver: 260g |
Power Supply |
DC 24V/2A |
Power Consumption |
PoC Power Supply: 40W (Max) |
Packing & Delivery
① 1× USB 3.0 Extender (Transmitter)
② 1× USB 3.0 Extender (Receiver)
③ 1× 24V/2A Locking Power Supply
④ 2× 4pin-3.5mm Phoenix Connector (Male)
⑤ 4× Mounting Ear
⑥ 8× Machine Screw (KM3*4)
② 1× USB 3.0 Extender (Receiver)
③ 1× 24V/2A Locking Power Supply
④ 2× 4pin-3.5mm Phoenix Connector (Male)
⑤ 4× Mounting Ear
⑥ 8× Machine Screw (KM3*4)
⑦ 1× User Manual
